Home | View Cart | My Account | Order Status

Search

Best Sellers

Energizer Watch/Electronic Batteries, 3 Volts, 2032, 2 batteries (Lithium Button Cell)

$1.99

Eureka Hand-Held Vacuum, 71B

$35.00

Nady MPF-6 6-Inch Clamp On Microphone Pop Filter

$18.52

Computer Add-Ons

Home »

Peerless Articulating Wall Mount For Up To 22" Display - Vesa 75/100MM (Silver)

Peerless Articulating Wall Mount For Up To 22" Display - Vesa 75/100MM (Silver)

(141 customer reviews)

List Price:
Our Price:	$70.39
You Save:

SKU:

4118500

In Stock

Usually ships in 1-2 business days

Only 2 left in stock, order soon!

Note: Item may be sold and shipped by another company. Learn more.

Description:

The Peerless LCD Flat Panel Articulating Wall Mount provides a cost-effective mounting solution for 10" to 22" LCD at panel screens. Extremely flexible, this mount folds at against the wall to a slim 2" depth or extends out up to 15.25". Its silver finish elegantly complements conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy, one-touch tilt and up to 180 degrees of swivel for optimal screen positioning. The LCS-KLA comes completely pre-assembled for a fast and easy installation.

Features:

•

Sold Individually

Product Details:

Product Length:	10.3 inches
Product Width:	7.0 inches
Product Height:	2.0 inches
Product Weight:	2.55 pounds
Package Length:	10.4 inches
Package Width:	7.3 inches
Package Height:	2.7 inches
Package Weight:	2.6 pounds
Average Customer Rating:	based on 141 reviews

You may also like ...

Eureka Hand-Held Vacuum, 71B

$35.00

Nady MPF-6 6-Inch Clamp On Microphone Pop Filter

$18.52

Energizer Watch/Electronic Batteries, 3 Volts, 2032, 2 batteries (Lithium Button Cell)

$1.99

Customer Reviews:

Average Customer Review: 4.5

( 141 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

82 of 83 found the following review helpful:

Solid and sturdy construction.Mar 18, 2006
By B. T. Denyer "Web designer"
I'm entrusting this wall mount to hold up my Viewsonic VA912-4 19" LCD. So far it has worked out beautifully.

BUT! I had to go to Lowe's to buy screws that fit the VA912. Even though the Viewsonic specifications clearly state that it has Vesa 100mm complient mounting holes on the back of the monitor, the 14mm screws provided with the Peerless Wall Mount were TOO LONG. They bottomed out on the display and had about 1/16th of an inch to go before the arm would be tight against the LCD's back. Washers didn't seem to allow it to tighten down securely enough.

If you have a Viewsonic display I STILL HIGHLY recommend this mount. But, I recommend you go out and buy four M4-.7 x 12mm machine screws. The screws provided are M4-.7 x 14mm and M4-.7 x 25mm. The 25mm screws are to be used with the plastic spacers (provided) for displays "with a hole pattern in a pocket."

Everything that came in my box:

(1) wall arm assembly
(4) M4-.7 x 14mm
(4) M4-.7 x 25mm
(4) .437H (plastic) spacers
(2) #14 x 2.5" flat head wood screw (these are big!)
(1) 4mm Allen wrench
(1) 5mm Allen wrench
(2) concrete anchors (yeah, you can hang this thing from a cinder block wall OR a stud in your drywall.)

You'll need to be able to find a stud in your wall, a drill, a big Philips head screw driver and I recommend a level or a friend that can 'eyeball' it for you (you want your monitor level, don't you?)

Don't let my experience discourage you! This arm is sturdy, trustworthy and quite useful for clearing up your desk. And who knows, maybe the screws provided will work for your LCD.

UPDATE: After 2 years, I am still very pleased with this thing. No sagging, no bending or twisting, no problems.

32 of 32 found the following review helpful:

Excellent Product, One Small IssueFeb 14, 2007
By Pileated
This unit is solid and very well made. THe mounting flange mates perfectly with my NEC 20" LCD monitor and the included screws fit as they should. In a few minutes I got my desk back! What's strange about this unit however is that even after I used a carpenter's level to mark the placement of the mounting holes on the wall, I found that the LCD is still not level when the entire setup is assembled. This means remounting the whole assembly at once rather than the mount and then the monitor (which is what the instructions show). This seems needlessly inefficient and a little precarious since the monitor and mounting hardware are all hanging by one screw while it's being done. Some users may not even worry about the screen not being level, but mine is mounted in front of picture frames and the out-of-level condition is conspicuous by comparison. (Dry wall anchors are included with the unit, but I strongly suggest not using them; find a wall stud and mount it right. Correction: these are concrete anchors, not for drywall. My concern is that someone might use them in drywall instead of screwing directly into a stud, which would be unfortunate to say the least when the screen hits the floor.)

30 of 32 found the following review helpful:

Not what pictured here or Peerless' PDF!! Specs wrong too!Nov 29, 2007
By J. SPIEGEL "Joe"
I'm downrating this product BEFORE I actually use it to hopefully catch your attention BEFORE you buy it! I read a bunch of reviews here, mostly favorable. One noted the itme pictured here on Amazon is different then what came. TRUE. It is also DIFFERENT than the item in the PDF from the Peerless site!! Seems there are 3 LCS-KLA'a but nobody (Peerless) has bothered to revision them ie. -1 -2 -3 etc. What I thought was the one in the PDF was the correct one, WRONG. The one pictured on the Peerless site IS the correct one. So it has a flat/squareish TV side plate with eight ROUND screw holes (not tear shaped) and it does NOT roll +/- 5 degrees. If you've ever hung a TV before tear shaped screw holes let you hang the TV on the already wall mounted arm EASILY! The 5 degree roll lets you correct a less than perfect install. I'm am currently waiting for a call back from a Peerless tech. I showed the CSR the bad PDF.

12 of 12 found the following review helpful:

Great price and product. Wish it had the ability to rotate the display.Sep 27, 2007
By frankfromnj
First, let me start by saying that this item is not the one you see pictured above. The arm has two parts, one upper and one lower, not the upper, middle, and lower that you see above. Actually, I think the product that I received is nicer looking than the picture above. The product works great and is very solid. I'm not sure what others were talking about with the screws. I used a #3 phillips head on my drill and they went into the wall no problem after pre-drilling the holes. If you use the right head they will not strip.

This is my first VESA mount and I learned a valuable lesson. I think that all VESA mounts should have the feature that allows the display to be rotated. The reason I say this in not just because my display is capable of displaying at 90 degrees. I am saying it because even though I leveled the arm very carefully if you are off by just a millimeter that millimeter will translate out to about a half-inch of tilt when you extend the monitor completely away from the wall. When I first extended it out I thought I had made a mistake but when I rechecked at the wall the arm was level. I was able to fix the issue by extending it from the left instead of the right but I cannot extend it all the way out without noticing the tilt. The ability to rotate would eliminate this issue. One way you could probably avoid this is to attach your monitor to the arm, extend it all the way out and then have someone level and mark it at the wall while you hold it in place. That way you would be leveling it at the fully extended position instead of simply at the wall.

Here is a tip for attaching your monitor to the arm. Unbolt the front portion of the arm from the back portion. Attach it to your monitor while it is safely laying on a towel on your desk. Reattach the two portions of the arm. This is much easier than trying to mount the monitor to the arm while it is attached to the wall and is able to be done with one person because you just have one bolt to attach.

11 of 11 found the following review helpful:

Out of levelFeb 28, 2007
By Matthew D. Long "Matt"
Very strong and the price was great but....

I am a professional builder and the mount is out of level. I mounted it twice using a 4 foot level and the monitor was out of level both times. I recommend attaching the monitor to the mount, have someone hold the entire setup against the wall and level it. Then mark the location of the two screw holes.

See all 141 customer reviews on Amazon.com