Home | View Cart | My Account | Order Status

Search

Miscellaneous

Best Sellers

Energizer Watch/Electronic Batteries, 3 Volts, 2032, 2 batteries (Lithium Button Cell)

$1.99

Eureka Hand-Held Vacuum, 71B

$35.00

Nady MPF-6 6-Inch Clamp On Microphone Pop Filter

$18.52

Home »

Cisco-Linksys WAP610N Wireless-N Access Point with Dual-Band

Cisco-Linksys WAP610N Wireless-N Access Point with Dual-Band

(50 customer reviews)

List Price:	$129.99
Our Price:	$86.09
You Save:	$43.90 (34%)

SKU:

745883587995-WAP610N

In Stock

Usually ships in 1-2 business days

Note: Item may be sold and shipped by another company. Learn more.

Description:

WRLS N ACCESS POINT WDUAL BAND Wireless

Features:

•

Add a Wireless-N (802.11n draft 2.0) network to an existing wired or wireless router

•

Complies with IEEE 802.11n draft 2.0 (2.4 GHz and 5 GHz), 802.11g, 802.11b and 802.11a standards

•

Wi-Fi certiied to ensure interoperability

•

Industrial-strength wireless encryption WPA2 to ensure security

•

Easy-to-use setup wizard

Product Details:

Product Length:	0.0 inches
Product Width:	0.0 inches
Product Height:	0.0 inches
Product Weight:	1.2 pounds
Package Length:	9.7 inches
Package Width:	6.3 inches
Package Height:	3.3 inches
Package Weight:	1.25 pounds
Average Customer Rating:	based on 50 reviews

You may also like ...

Linksys WES610N 4-Port Dual-Band N Entertainment Bridge

To see price, add to cart.

Linksys SE2800 8-Port Gigabit Ethernet Switch

To see price, add to cart.

Linksys SE2500 5-Port Gigabit Ethernet Switch

To see price, add to cart.

Customer Reviews:

Average Customer Review: 2.5

( 50 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

28 of 29 found the following review helpful:

Do not buy this item (WAP610N)Jan 12, 2011
By Charles Orton
I purchased a couple of these WAP610N access points for clients based on Linksys/Cisco reputation. I made the mistake of not checking the Linksys support forums first. Big Mistake.

This product with current firmware (as of 01/12/2011) simply does not work as advertised. There are many documented problems with connectivity, rebooting under load, inability to pass DHCP packets properly, and static IP addressing in the 10.x.x.x range to allow me to provide a positive recommendation for this product. Cisco and Linksys should be ashamed to have released such a buggy product. Calling them on the phone is a complete waste of time, and posting in their on-line support forums (along with the other unfortunate WAP610N owners) is also futile, because Cisco/Linksys will not even acknowledge the issues (but they are quick to edit your forum postings if you say something that they do not like).

Consequently I have no other options but to return the WAP610N units for refunds and to make others aware of the potential problem with this device. The most current firmware for this device was released about 9 months ago in March of 2010.

Linksys - I've learned my lesson. No more Linksys or Cisco gear for my business or for my clients. Thank you.

31 of 34 found the following review helpful:

Nice unit for the money.Dec 16, 2009
By Integrity Electronics USA "Jim B."
This new WAP from Cisco / Linksys is smaller and easier to install than previous models, and is a great price for a dual band B/G/N WAP.
The range seems pretty good too, but we've noticed that there can be a huge difference with signal reception, depending on the quality of internal wireless antennae in certain laptops and netbooks.
e.g. At one of our customers' home: Her new PC netbook and laptop had 'Good' reception (3 out of 5 bars), while my Apple MacBookPro had 'Excellent' reception from the same location. The WAP was broadcasting plenty of signal.
Her two computers just couldn't receive all the signal, because of poor internal wireless antennae. So if you buy this product, and the range seems weak, don't assume it's the WAP.
Also, make sure you select 'Wireless-N Only' mode, if ALL your computers have newer 802.11n cards.
This will speed up your connection.
If you don't have N cards, then leave the setting in 'Mixed' mode, otherwise your B and G cards won't receive any signal.

Hope this helps.
Integrity Electronics USA

13 of 15 found the following review helpful:

Excellent productNov 01, 2009
By N. Levi
I have a complicated network. In addition our space can only be covered with two access points. It was very easy to configure two of these units so that they work in sync so that when you switch from one access point to the other, the switch is seamless and transparent to the user.

12 of 14 found the following review helpful:

Great Dual Band WAP. (It's not a simultaneous Dual Band WAP though)Nov 10, 2009
By cpyao
I have this configured as a 2.4Ghz Wireless-G Access Point at my place. It works great, I haven't had any issues with it. The one downside to this WAP610N (and also their WET610N)is that it takes a long time for it to reboot itself once you've made changes in the settings and save them, but it's not that big of a deal though. Also, I thought that this was a Simultaneous Dual Band (2.4Ghz & 5Ghz) like the WRT610N Router, but it's not. It's either or, I guess I should have read the specs a little better, but I still would have purchased it anyway. I guess they did that for a reason since I just bought a second one today so I can run that one as a 5Ghz Wireless-N Access Point. I've only been using it for a week but I haven't had any issues with it at all, it's a great WAP.

7 of 8 found the following review helpful:

Whatta hunka junk.Apr 25, 2010
By Cuthbert J. Twillie
Y'know the old saying "If it sounds to good to be true, it probably is"?

I'm on my second one of these, having returned the first one. I should say up front that we have no problem with wi-fi in the house. Neither of the laptops (Mac and PC) encounter any difficulty anywhere in the house, even in the basement (the router is on the 2nd floor).

The first one worked on and off for streaming from the internet , always freezing, saying "loading please wait," then it would proceed to "load" but never restart. Or I couldn't even get into the program, it kept saying network connection broken, network down, cannot find the network, and I'd have to unplug the Linksys bridge and the Sony 460 BD for a few minutes then plug them in again. So, after one hour-and-a-half conversation on the phone with Linksys, and another hour-and-a-half instant messenging back and forth with them, we sent it back for a replacement.

The replacement arrived, and for a day or two worked fine. Then it started malfunctioning all over again. Now it doesn't even show any connection to the net at all. I'm still working to get my money back (didn't buy it through Amazon, got it thru Best Buy and the replacement came direct from Linksys).

Whatta hunka junk.

See all 50 customer reviews on Amazon.com

Automotive

Cell Phones & Service

Computer & Video Games

Electronics

Gourmet Food

Health & Personal Care

Home & Garden

Jewelry & Watches

Music

Musical Instruments

Office Products

Software

Sports & Outdoors

Toys & Games

Miscellaneous

Cisco-Linksys WAP610N Wireless-N Access Point with Dual-Band

Cisco-Linksys WAP610N Wireless-N Access Point with Dual-Band

745883587995-WAP610N

WRLS N ACCESS POINT WDUAL BAND Wireless

Add a Wireless-N (802.11n draft 2.0) network to an existing wired or wireless router

Complies with IEEE 802.11n draft 2.0 (2.4 GHz and 5 GHz), 802.11g, 802.11b and 802.11a standards

Wi-Fi certiied to ensure interoperability

Industrial-strength wireless encryption WPA2 to ensure security

Easy-to-use setup wizard