Home | View Cart | My Account | Order Status

Search

Best Sellers

Energizer Watch/Electronic Batteries, 3 Volts, 2032, 2 batteries (Lithium Button Cell)

$1.99

Eureka Hand-Held Vacuum, 71B

$35.00

Velcro Reusable Self-Gripping Cable Ties, 0.5 Inches x 8 Inches Long, Black, 100 Ties per Pack (91140)

$8.87

Graphics Cards

Home »

AverMedia NVD4VIEXT 4-Channel Video Extension Card

AverMedia NVD4VIEXT 4-Channel Video Extension Card

(2 customer reviews)

SKU:

795522960054-NVD4VIEXT

This product is currently out of stock

Description:

MODEL- NVD4VIEXT VENDOR- AVERMEDIA TECH FEATURES- 4-Channel Video Extension 4-Channel Video Extension for NV5000 (NVDNV5000) DVR Boards. Up to 3 Video Extensions can be hooked up per computer system.

Features:

•

Accessory for AVerDVR NV5000 Series Hybrid Surveillance Platform

•

Expands NV5000 video network

•

Lightweight, compact, and competitively priced

•

Compatible with a hybrid system that combines analog and digital video technologies

•

Increases coverage area to provide maximum security

Product Details:

Product Length:	6.0 inches
Product Width:	4.25 inches
Product Height:	1.5 inches
Product Weight:	0.35 pounds
Package Length:	5.8 inches
Package Width:	4.1 inches
Package Height:	1.6 inches
Package Weight:	0.35 pounds
Average Customer Rating:	based on 2 reviews

You may also like ...

Eureka Hand-Held Vacuum, 71B

$35.00

Energizer Watch/Electronic Batteries, 3 Volts, 2032, 2 batteries (Lithium Button Cell)

$1.99

Velcro Reusable Self-Gripping Cable Ties, 0.5 Inches x 8 Inches Long, Black, 100 Ties per Pack (91140)

$8.87

Customer Reviews:

Average Customer Review: 3.5

( 2 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

Inexpensive add-on for 4 extra analog channelsFeb 09, 2012
By Neil Maxwell "Specializing Generalist"
This expansion allows you to add 4 extra analog channels to your NV5000 card. When you install it and restart the NV5000 software (you don't need to reboot), it detects the expansion card and allows you to set up channels 5-8. Note that the extra channels only support analog cams, not IP cams - you can run 4 analog or IP cams on channels 1-4, and 4 analog cams on channels 5-8, for a total of 8 cams, 4 of which can be IP cams.

It also drops the maximum frame rate per channel, as the card still supports the same total frames per second, but now divides it between 8 channels instead of 4. If your PC is already struggling with 4 channels (especially if they're IP cams), you'll tax it further with this add-in, but that's the way it is with capture cards and older PCs.

If you want to test how your system will work with this installed, you can fake it into thinking the card is installed by adding a jumper to the NV5000 expansion connector at one end. This will enable the extra 4 channels, though you won't have any way to connect cameras to them unless you also make some 2 pin connector to BNC cables. Still, it will let you check the new settings and see how your maximum frame rate and display layouts are affected.

You do get more than just cables with BNC connectors for your money - you also get a PCB and slot mount that gives a secure connection. If you're good with making stuff, you can certainly make your own version easily enough, but whether the tradeoff of time vs the money saved is worth it is a personal call.

0 of 1 found the following review helpful:

Necessary EvilNov 02, 2011
By Mr. Isotope
This must be a nice little profit generator for the company. It is nothing more than 4 BNC connectors connected to a ribbon cable. No active electronics whatsoever. Probably cost less than a dollar to make. But if you want the extra channels for your card, you don't have much of a choice except to buy this. Yeah, it works....but what a ripoff.